Skip to main content

Horiba LAQUA PC1500 (double channel meter only)

Product number: 895840

Product information "Horiba LAQUA PC1500 (double channel meter only)"

Stress-free measurement - professional model 

Water quality analysis is repeatedly performed in laboratories on a daily basis. Our multiparameter laboratory measuring instrument was developed to provide simplicity with excellent on-site usability - from operation and maintenance through to troubleshooting. Simultaneous measurement is possible by connecting two electrodes at the same time.

Ideal for student training and routine applications. Good value for money: no bells and whistles that sounds good but is rarely used. From a renowned manufacturer whose company started with pH meters as early as 1945.

  • Highly accurate measurements 
  • Automatic temperature compensation 
  • Accepts up to 6 pH- and up to 5 conductivity- calibration points 
  • Auto calibrates USA, NIST, & DIN pH buffers 
  • Displays offset & average slope 
  • Allows 1-point ORP-, salinity- and temperature- calibration
Scope of delivery: 

  • Measuring instrument
  • Universal mains adapter with 6 plugs 
  • Operating instructions 

Starter set version additionally contains: 

  • 9625-10D refillable pH electrode with plastic body 
  • 9382-10D plastic body conductivity electrode, cell constant k=1.0 
  • pH 4, 7 and 10 buffer solutions & 3.33M KCl (1 x 250ml each)
  • 84 µS/cm, 1413 µS/cm, 12.88 mS/cm conductivity standard (1 x 250ml each)
  • with electrode holder

Other attributes

Applications Aquaculture and Coral, Aquariums, Beer, Beverages, Environmental, Food, Horticulture, Hydroponics, Laboratory, Schools, Water Conditioning, Wine
Brand Horiba
Country of origin JP
Customs tariff number 90278930
Parameter Combined Multiparameter, Conductivity and TDS, ORP, Salinity, pH
Quality Professional
Technical data

pH

Range: -2.00 to 16.00
pH Resolution: 0.01
pH Accuracy: ± 0.01
pH Buffer Groups: USA, NIST, DIN
Calibration points: Up to 5 (USA, NIST) / Up to 6 (DIN)

ORP

Range: ± 2000.0 mV
Resolution: 0.1 mV (< ±1000 mV), 1 mV (≥ ±1000mV)
Accuracy: ±0.3 mV (< ±1000 mV), 0.3% of reading (≥ ±1000mV)
Calibration points: 1 (Up to ±200 mV)

Conductivity Range

0.00 μS – 200.0 mS
Resolution 0.01 / 0.1 / 1 μS ; 0.01 / 0.1 mS
Accuracy ±0.6% full scale, ±1.5% full scale > 18.0 mS/cm
Reference Temperature 15.0 to 30.0 °C (adjustable)
Temperature Coefficient 0.00 to 10.00 % per °C (adjustable)
Cell Constants 0.070 to 13.00 (adjustable)
Calibration points Up to 4 (Auto) / Up to 5 (Manual) Units S/cm, S/m (Auto ranging)

Resistivity

Range 0.000 Ω•cm to 20.0 MΩ•cm
Resolution 0.5% full scale
Accuracy ±0.6% full scale, ±1.5% full scale > 1.80 MΩ•cm

Total Dissolved Solids (TDS)

Range 0 ppm – 100 ppt
Resolution 0.01 / 0.1 / 1 ppm ; 0.01 / 0.1 ppt
Accuracy ±0.1% full scale
TDS Curves EN27888, 442, NaCl, Linear (0.40 to 1.00)

Salinity

Range 0.0 to 100.0 ppt / 0.00 to 10.00 %
Resolution 0.1 ppt / 0.01%
Accuracy ±0.2% full scale
Salinity Curves NaCl / Seawater Calibration points 1 point

Temperature

Range: -30.0 to 130.0 °C / -22.0 to 266.0 °F
Resolution: 0.1 °C / °F
Accuracy: ± 0.5 °C / ± 0.9 °F
Calibration points: 1 point ( ± 10.0 °C / ± 18.0 °F range in 0.1 °C increments)

General Features

Memory: 1000 data sets
Auto Data Logging: Yes – interval from 2 to 999 seconds
Measurement modes: Auto Stable / Auto Hold / Real Time
Offset & Slope display: Yes (Average slope)
Auto Shut-Off: Yes (programmable: 1 to 30 mins.)
Electrode status: On screen display
PC / Printer Communication: Phono jack (USB / RS232)
Meter Input: 2 x BNC, 2 x phono (ATC)
Display: Large monochrome 160 segment LCD, 85 x 104 mm
Electrode Stand: Integrated
Power Requirement: AC adaptor 100 - 240V, 50 - 60Hz
Dimensions: 160 x 150 x 67 mm (meter) / 410 x 260 x 230 mm (boxed)
Weight: Meter / Boxed 720g / 3700g

Extract of our recommended electrodes

Horiba 9652-10D pH electrode with double junction for hand-held meters of the LAQUA 200 series
Product number: 895744
Cable length: 1 meter |
Measurement parameters: pH | Temperature
Manufacturer Part Nr. 3200786359

€135.00*
Horiba 9625-10D, refillable pH electrode
Product number: 895858
Measuring range: pH: 0 to 14 | Temperature: 0 to 100 °C | Measurement parameters: pH | Temperature
Manufacturer number: 3200360505This refillable pH electrode with plastic housing and integrated temperature sensor is recommended for general use.

€170.00*
Horiba 9615S-10D, Standard ToupH electrode (for general laboratory application)
Product number: 895853
Measuring range: pH: 0-14 | Temperature: 0-100° | Measurement parameters: pH | Temperature
Manufacturer Part Number: 3200585428This glass-body, refillable pH electrode with integrated temperature sensor is recommended for a wide range of applications, including pH buffers and aqueous test solutions.  Offers quick stability and drift reductionConstructed with responsive glass that is 10x stronger than JIS standardsThe dome-shaped tip provides strength in all directions, reducing damage concernsWaterproof, Pb-free glass

€230.00*
Horiba 9681S-10D ToupH sleeve electrode (for viscous and non-aqueous sample)
Product number: 895856
Measuring range: pH: 0 to 14 | Temperature: 0 to 60°C | Measurement parameters: pH | Temperature
Manufacturer number: 3200585463pH electrode with integrated temperature sensor for stable measurements of highly viscous samples. The saline bridge part is equipped with a movable sleeve that can be easily cleaned to prevent viscous samples from clogging the saline bridge and to keep measurements stable and accurate.Rapid stabilisation and reduction of aeronauticsToupH electrodes use sensitive glass, reducing the risk of damageWaterproof (IP-67), pb-free glassWhen measuring samples with high viscosity or non-aqueous solutions (e.g. paints or cosmetics), we recommend using the instrument's chart function to ensure stability.

€400.00*
Horiba 9618S-10D, Micro ToupH electrode (for low-volume samples)
Product number: 895854
Measuring range: pH: 0 to 14 |Temperature: 0 to 100°C | Measurement parameters: pH | Temperature
Manufacturer number: 3200585447This refillable glass-body pH electrode with temperature sensor can measure samples as low as 50µL.Compatible with extremely small sample containers (e.g., microtubes)Temperature sensor is placed beside the bulb for quick responseWaterproof

€460.00*
Horiba 9382-10D, conductivity measuring cell (submersible type)
Product number: 895893
Measuring range: Conductivity: 1µS/cm to 100mS/cm | Temperature: 0 to 80 °C | Measurement parameters: Conductivity | temperature
Manufacturer's number: 3014046709For general use Plastic housing, titanium/platinum black, k=1, conductivity cell with integrated temperature sensorWaterproofunder water measurements up to a depth of 1 meter

€275.00*
Horiba 3551-10D, Conductivity measuring cell (submersible type)
Product number: 895895
Measuring range: Conductivity: 0.1 µS/cm to 10 S/cm | Temperature: 0 to 60 °C | Measurement parameters: Conductivity | Temperature
Manufacturer's number: 3014081712For water with low conductivity (e.g. deionized, distilled)Glass housing, platinum/platinum black, k=1, conductivity measuring cell with integrated temperature sensor Waterproof

€570.00*
Horiba 3553-10D, conductivity measuring cell (submersible probe)
Product number: 895897
Measuring range: Conductivity: 10µS/cm to 1S/cm | Temperature: 0 to 60 °C | Measurement parameters: Conductivity | Temperature
Manufacturer's number: 3014081714For water with high conductivity  Glass body, platinum/platinum black, k=10, conductivity measuring cell with integrated temperature sensor Waterproof

€570.00*

Wir empfehlen Ihnen dazu

Horiba electrode stand for LAQUA 1500 & 2000 series
Product number: 895946
Electrode stand suitable for LAQUA 1500 & 2000 series.The electrode stand can hold two electrodes and can be adjusted in height.

€50.00*