Skip to main content

Horiba LAQUA PH2000 (double channel meter only)

Product number: 895841

Product information "Horiba LAQUA PH2000 (double channel meter only)"

High-end laboratory measuring instrument for analytics 

Dear customers, herewith we offer you our highly professional Horiba laboratory table-top measuring instrument of the 2000 series. 

The LAQUA 2000 series laboratory tabletop meter has a very high-quality 5 inch display with backlighting which shows you all the important information, such as the measured value with up to three decimal places (depending on the resolution), the temperature, the date with time and much more. 

The LAQUA 2000 series also offers you an adequate device memory with automatic data storage after a set time interval to document your daily measurements accurately over a long period of time. To protect the device settings from unauthorised access, they are password-protected. After your measurements, you can easily transfer all measurement data from the device to your PC via a USB cable in CSV, Excel and Pdf formats using the DAS20 software. 

In order to facilitate your daily work with the device, the table measuring device visualises the correct calibration, the stable measurement as well as the electrode wear condition. The operation is intuitive because the available keys are marked with symbols and abbreviations. After the analysis, you can clean the device easily and in a time-saving manner with a damp cloth, as the surface is dirt-repellent due to its nature.

The electrode stand included in the starter set can be used to hold two electrodes and adjust their height. This allows you to individually align your electrode to your container or glass for calibration and measurement.

Special features of the LAQUA PH2000 model:

The PH2000 allows you to measure the pH- or ORP- value

pH-ORP

  • wide measuring range; -2.000 to 20.000 pH 
  • high accuracy; ± 0.003 pH 
  • resolution: 0.1, 0.01 or 0.001 pH 
  • continuous display of calibrated points 
  • display of offset and slope - by segment and average up to 5 pH 
  • calibration points ± 2000.0 mV 
  • 1-point redox calibration 
  • automatically recognises and calibrates USA, NIST, NIST2 and DIN pH buffers 
  • allows CUST (Custom) buffers for manual calibration 


Below we would like to show you in full the general functions of the Horiba LAQUA 2000 series: 
  • internal memory for up to 2000 data sets, measurement data with time and date information 
  • records and stores data in the unit memory based on a specified time interval 
  • a 4-digit password protects the meter set-up mode from unauthorised access 
  • data can be transferred to a computer and exported in the following formats CSV/Excel/PDF 
  • GLP/GMP  compliance of the instrument as data can be displayed, recorded and printed with date and time stamp on the instrument 
  • Software updates can be downloaded to the instrument 
  • Calibration reminder function, indicates that it is time to calibrate (alarm adjustable up to 90 days) 
  • Electrode holder is mounted on the meter and can hold up to 2 electrodes (rotates 360º and can be moved up and down 30cm). Electrode holder only included in the starter set. 
  • Displays measurement stability in measurement and calibration mode 
  • displays electrode condition based on calibration data 
  • smooth surface, easy cleaning 
  • RS-232/USB, therefore easy PC and printer connection and free instrument software 
  • Ergonomic design for easy viewing and operation 
  • Clearly labelled and easy-to-use ports for communication and measurement 
  • 5" digital display with backlight, shows all important measurement values and status 
  • Automatic calibration, recognises a wide range of standard solutions
  • adjustable switch-off time (up to 30 minutes) 
  • temperature compensation, the temperature in °C or °F is either automatically detected if a temperature sensor is connected (ATC mode) or manually entered by the user 
  • several measuring modes: 
  1. Auto-Stable mode signals a stable measured value,
  2. Auto-Hold mode holds a stable measured value
  3. Real Time mode continuously displays current readings 
  • small meter footprint of 155 x 150 mm, saves valuable space 
  • Temperature detection, easy display of sample temperature user selectable resolution, up to 3 digits 
  • Fixed and individual calibration points
  • Easy navigation, navigate through the settings menu by up, down, right and left 

Scope of delivery: 
  • Measuring instrument
  • Universal mains adapter with 6 plugs 
  • Operating instructions 

Starter set version additionally contains 
  • 9625-10D refillable pH electrode with plastic body 
  • pH 4, 7 and 10 buffer solutions & 3.33M KCl (1 x 250ml each) 
  • with electrode holder

Manufacturer part number:
Meter only   PH2000 (3200896829) 
Starter-set   PH2000-SR (1300098880)

Other attributes

Applications Aquaculture and Coral, Aquariums, Beer, Beverages, Environmental, Food, Horticulture, Hydroponics, Laboratory, Schools, Water Conditioning, Wine
Brand Horiba
Country of origin JP
Customs tariff number 90278930
Parameter Combined Multiparameter, ORP, pH
Quality Professional
Technical data

pH

Range: -2.000 to 20.000
pH Resolution: 0.1 / 0.01 / 0.001 
pH Accuracy: ± 0.003
pH Buffer Groups: USA, NIST, NIST2, DIN, Custom
Calibration points: Up to 5 (USA, NIST, NIST2, Custom) / Up to 6 (DIN)

ORP

Range: ± 2000.0 mV
Resolution: 0.1 mV
Accuracy: ±0.2 mV 
Calibration Option: Yes (Up to ±200 mV)

Temperature

Range: -30.0 to 130.0 °C / -22.0 to 266.0 °F
Resolution: 0.1 °C / °F
Accuracy: ± 0.5 °C / ± 0.9 °F
Calibration points: Yes ( ± 10.0 °C / ± 18.0 °F range in 0.1 °C increments)

General Features

Memory: 2000 data sets
Auto Data Logging: Yes
Real-time Clock: Yes
Date & Time Stamp: Yes
Auto Shut-Off: Yes (programmable: up to 30 mins.)
Measurement modes: Auto Stable / Auto Hold / Real Time
Offset & Slope display: Yes (Segment and Average slopes)
Calibration alarm: Yes (programmable: up to 90 days)
Electrode status: On screen display
Diagnostic messages: Yes
Display: 5" Custom LCD witch backlight an 320 segments
Meter Input: 1 x BNC, 1 x phono (ATC)
Outputs: Phono jack (USB / RS232)
Power Requirement: AC adaptor 100 - 240V, 50 - 60Hz
Dimensions: 155 (L) x 150 (W) x 67 (H) mm / 410 (L) x 260 (W) x 230 mm (H) (boxed)
Weight: Meter / Boxed 765g / 3800g

Extract of our recommended electrodes

Horiba 9652-10D pH electrode with double junction for hand-held meters of the LAQUA 200 series
Product number: 895744
Cable length: 1 meter |
Measurement parameters: pH | Temperature
Manufacturer Part Nr. 3200786359

€135.00*
Horiba 9625-10D, refillable pH electrode
Product number: 895858
Measuring range: pH: 0 to 14 | Temperature: 0 to 100 °C | Measurement parameters: pH | Temperature
Manufacturer number: 3200360505This refillable pH electrode with plastic housing and integrated temperature sensor is recommended for general use.

€170.00*
Horiba 9615S-10D, Standard ToupH electrode (for general laboratory application)
Product number: 895853
Measuring range: pH: 0-14 | Temperature: 0-100° | Measurement parameters: pH | Temperature
Manufacturer Part Number: 3200585428This glass-body, refillable pH electrode with integrated temperature sensor is recommended for a wide range of applications, including pH buffers and aqueous test solutions.  Offers quick stability and drift reductionConstructed with responsive glass that is 10x stronger than JIS standardsThe dome-shaped tip provides strength in all directions, reducing damage concernsWaterproof, Pb-free glass

€230.00*
Horiba 9681S-10D ToupH sleeve electrode (for viscous and non-aqueous sample)
Product number: 895856
Measuring range: pH: 0 to 14 | Temperature: 0 to 60°C | Measurement parameters: pH | Temperature
Manufacturer number: 3200585463pH electrode with integrated temperature sensor for stable measurements of highly viscous samples. The saline bridge part is equipped with a movable sleeve that can be easily cleaned to prevent viscous samples from clogging the saline bridge and to keep measurements stable and accurate.Rapid stabilisation and reduction of aeronauticsToupH electrodes use sensitive glass, reducing the risk of damageWaterproof (IP-67), pb-free glassWhen measuring samples with high viscosity or non-aqueous solutions (e.g. paints or cosmetics), we recommend using the instrument's chart function to ensure stability.

€400.00*
Horiba 9618S-10D, Micro ToupH electrode (for low-volume samples)
Product number: 895854
Measuring range: pH: 0 to 14 |Temperature: 0 to 100°C | Measurement parameters: pH | Temperature
Manufacturer number: 3200585447This refillable glass-body pH electrode with temperature sensor can measure samples as low as 50µL.Compatible with extremely small sample containers (e.g., microtubes)Temperature sensor is placed beside the bulb for quick responseWaterproof

€460.00*

Wir empfehlen Ihnen dazu

Horiba electrode stand for LAQUA 1500 & 2000 series
Product number: 895946
Electrode stand suitable for LAQUA 1500 & 2000 series.The electrode stand can hold two electrodes and can be adjusted in height.

€50.00*