Manufacturer's number: 3200697407
Ion-selective electrodes respond to the concentration of specific ions in the test fluid and are variable potential electrodes. They are used in combination with reference electrodes to measure the concentration of certain ions.
When measuring with an ion meter, the ion concentration can be read directly by calibrating with different standard solutions. Since the volume reading changes with temperature, measurements must be taken at a fixed temperature.
Note:
Chloride sensor, if selected, is supplied without chloride ion strength regulator and chloride electrode filling solution. This must be procured by the customer. Without the filling solution the sensor can´t be used.
The Horiba LAQUA 300 BNC adapter is an intermediate piece to connect an ion selective electrode to the Smart Sensor Module with cable to an 300 series meter. After prior clarification with our company, your previous pH and redox electrodes can, if applicable, be connected to the 300 series meter after a compatibility check.Manufacturer number: 3200821465
Cable with digital sensor head to accommodate the ion selective sensors.
Manufacturer Part Nr. :3200812203 (2 metres 300-I-2) 3200923560 (5 metres 300-I-5) Note: To use the ion selective sensors, the respective adapters are required.
Cable with digital sensor head to accommodate the ion selective sensors.
Manufacturer Part Nr. :3200812203 (2 metres 300-I-2) 3200923560 (5 metres 300-I-5) Note: To use the ion selective sensors, the respective adapters are required.
